VESPA PAIR ENGINE SILENT BLOCK MOUNTS
VESPA PX200, RALLY 200 (VSE1T) (2nd Series)
VESPA PX 200, V50, PV125 ET3, PK
Disposal over inserted rubbers. Remove (lever out) the old rubbers from the housing. Push the new rubbers back into the housing with a little talcum powder.
VESPA PX80-150, SPRIN, VBB, etc.
These models use pressed rubber ex works.
Here the caulked axle ends are drilled out / deflected. Remove tube and rubber from the housing.
Push the new rubbers with a little talcum back into the housing.NOTE: Mount the silent rubbers dry, do not grease/oil them. Use talcum powder for easier mounting.
Please note:
The rubbers are to be installed directionally.In direction of travel left: Red colour marking
In direction of travel right: Green colour marking
